If you have ever measured a “1/2 inch” PVC pipe and found it is closer to 7/8 inch across, you are not alone. PVC pipe sizes are nominal: the number on the label is a trade name, not the actual measurement. This guide gives you a complete PVC pipe size chart for Schedule 40 and Schedule 80, with the real outside diameter, wall thickness, inside diameter and pressure rating for every common size from 1/2″ to 12″.
Quick Answer: How PVC Pipe Sizes Work
- The nominal size is not the real size. A 1″ PVC pipe has an outside diameter of 1.315″ and an inside diameter of about 1.049″ (Schedule 40).
- Schedule 40 and Schedule 80 have the same outside diameter. That is why they fit the same size fittings. The difference is the wall thickness.
- Schedule 80 has a thicker wall, so it has a smaller inside diameter and a higher pressure rating.
- All dimensions below follow ASTM D1785, the standard for Schedule 40, 80 and 120 PVC pressure pipe.
Schedule 40 PVC Pipe Dimensions Chart
Schedule 40 is the white PVC pipe used in most residential and light commercial work: water service lines, irrigation, pool plumbing and, in larger sizes, drain-waste-vent (DWV) lines.
| Nominal Size | Outside Diameter (OD) | Min. Wall | Inside Diameter (ID)* | Max. Pressure @ 73°F | Shop 20 ft |
|---|---|---|---|---|---|
| 1/2″ | 0.840″ | 0.109″ | 0.622″ | 600 psi | 1/2″ Sch 40 |
| 3/4″ | 1.050″ | 0.113″ | 0.824″ | 480 psi | 3/4″ Sch 40 |
| 1″ | 1.315″ | 0.133″ | 1.049″ | 450 psi | 1″ Sch 40 |
| 1-1/4″ | 1.660″ | 0.140″ | 1.380″ | 370 psi | 1-1/4″ Sch 40 |
| 1-1/2″ | 1.900″ | 0.145″ | 1.610″ | 330 psi | 1-1/2″ Sch 40 |
| 2″ | 2.375″ | 0.154″ | 2.067″ | 280 psi | 2″ Sch 40 |
| 2-1/2″ | 2.875″ | 0.203″ | 2.469″ | 300 psi | 2-1/2″ Sch 40 |
| 3″ | 3.500″ | 0.216″ | 3.068″ | 260 psi | 3″ Sch 40 |
| 4″ | 4.500″ | 0.237″ | 4.026″ | 220 psi | 4″ Sch 40 |
| 5″ | 5.563″ | 0.258″ | 5.047″ | 190 psi | 5″ Sch 40 |
| 6″ | 6.625″ | 0.280″ | 6.065″ | 180 psi | 6″ Sch 40 |
| 8″ | 8.625″ | 0.322″ | 7.981″ | 160 psi | 8″ Sch 40 |
| 10″ | 10.750″ | 0.365″ | 10.020″ | 140 psi | 10″ Sch 40 |
| 12″ | 12.750″ | 0.406″ | 11.938″ | 130 psi | 12″ Sch 40 |
Schedule 80 PVC Pipe Dimensions Chart
Schedule 80 is usually dark gray and is used where higher pressure, physical impact or chemical exposure is a concern: commercial and industrial water lines, pump discharge, exposed runs and process piping.
| Nominal Size | Outside Diameter (OD) | Min. Wall | Inside Diameter (ID)* | Max. Pressure @ 73°F | Shop 20 ft |
|---|---|---|---|---|---|
| 1/2″ | 0.840″ | 0.147″ | 0.546″ | 850 psi | 1/2″ Sch 80 |
| 3/4″ | 1.050″ | 0.154″ | 0.742″ | 690 psi | 3/4″ Sch 80 |
| 1″ | 1.315″ | 0.179″ | 0.957″ | 630 psi | — |
| 1-1/4″ | 1.660″ | 0.191″ | 1.278″ | 520 psi | 1-1/4″ Sch 80 |
| 1-1/2″ | 1.900″ | 0.200″ | 1.500″ | 470 psi | 1-1/2″ Sch 80 |
| 2″ | 2.375″ | 0.218″ | 1.939″ | 400 psi | 2″ Sch 80 |
| 2-1/2″ | 2.875″ | 0.276″ | 2.323″ | 420 psi | — |
| 3″ | 3.500″ | 0.300″ | 2.900″ | 370 psi | 3″ Sch 80 |
| 4″ | 4.500″ | 0.337″ | 3.826″ | 320 psi | 4″ Sch 80 |
| 5″ | 5.563″ | 0.375″ | 4.813″ | 290 psi | — |
| 6″ | 6.625″ | 0.432″ | 5.761″ | 280 psi | — |
| 8″ | 8.625″ | 0.500″ | 7.625″ | 250 psi | — |
| 10″ | 10.750″ | 0.593″ | 9.564″ | 230 psi | — |
| 12″ | 12.750″ | 0.687″ | 11.376″ | 230 psi | — |
*Inside diameter is calculated from the nominal outside diameter and the minimum wall thickness; actual ID varies slightly by manufacturer. Pressure ratings are for water at 73°F per ASTM D1785 and decrease as temperature rises. Always confirm with the manufacturer’s data sheet and your local code.
Schedule 40 vs. Schedule 80: What’s the Difference?
Because both schedules share the same outside diameter, a 2″ Schedule 40 pipe and a 2″ Schedule 80 pipe look almost identical from the outside. The differences are inside the wall:
- Wall thickness: Schedule 80 walls are roughly 35–70% thicker. A 2″ pipe goes from 0.154″ (Sch 40) to 0.218″ (Sch 80).
- Inside diameter and flow: the thicker wall reduces the bore. A 1/2″ Schedule 80 pipe has an ID of about 0.546″, versus 0.622″ for Schedule 40, so it carries a little less water at the same pressure.
- Pressure rating: Schedule 80 handles roughly 40% more pressure. At 73°F, 4″ Schedule 40 is rated at 220 psi and 4″ Schedule 80 at 320 psi.
- Color: Schedule 40 is usually white; Schedule 80 is usually dark gray. Color is a convention, so always read the print line on the pipe.
- Cost and weight: Schedule 80 uses more material, so it weighs and costs more per foot.
Can you mix them? Yes, the outside diameters match, so Schedule 40 and Schedule 80 pipe and fittings can be solvent-welded together. Keep in mind that the system is only as strong as its weakest part: a Schedule 80 line with Schedule 40 fittings should be treated as a Schedule 40 system.
How to Measure PVC Pipe Size
- Measure the outside diameter (OD) with a caliper or a tape measure across the widest point of the pipe.
- No caliper? Wrap a string or flexible tape around the pipe to get the circumference and divide by 3.1416 to get the OD.
- Match the OD to the chart. For example, an OD of 1.900″ is a 1-1/2″ pipe and an OD of 3.500″ is a 3″ pipe, whether it is Schedule 40 or 80.
- Check the print line on the side of the pipe to confirm the schedule, the standard (ASTM D1785 or D2665) and the pressure rating.
Which PVC Pipe Size Do You Need?
Every project is different and local code always has the final word, but these are the sizes you will see most often in homes and small commercial jobs in South Florida:
- 1/2″ and 3/4″: irrigation lines and some cold water distribution where code allows.
- 1″ to 1-1/4″: main irrigation lines, water service lines and pump connections.
- 1-1/2″: bathroom and kitchen sink drains, tub drains and vents.
- 2″: shower drains, laundry standpipes and vents.
- 3″: toilet drains and branch drain lines.
- 4″ and up: building drains, main sewer lines and commercial work. Sizes up to 20″ are available, like our 20″ x 20 ft Schedule 40 PVC pipe.
Pressure Ratings Drop When PVC Gets Hot
The pressure ratings in the charts above are for water at 73°F. PVC loses strength as temperature rises, and its maximum recommended service temperature is 140°F. In South Florida, pipe that runs through a hot attic, sits in direct sun or carries warm process water will not hold its full rated pressure. PVC is also not meant for hot water supply lines. For hot water, use CPVC pipe, PEX or copper. Our guide to PEX vs. copper vs. PVC explains when to use each one.
Solid Wall vs. Foam Core Schedule 40
You will also find foam core (cellular core) Schedule 40 pipe. It has the same outside diameter as solid Schedule 40, so it fits the same DWV fittings, but it is lighter and less expensive. Foam core is made for non-pressure drain, waste and vent lines only. Never use it for water supply or any pressurized line.
Frequently Asked Questions
What is the outside diameter of a 3 inch PVC pipe?
A 3″ PVC pipe has an outside diameter of 3.500″, for both Schedule 40 and Schedule 80. The inside diameter is about 3.068″ for Schedule 40 and 2.900″ for Schedule 80.
Is 1/2 inch PVC pipe really 1/2 inch?
No. A 1/2″ PVC pipe has an outside diameter of 0.840″ and an inside diameter of about 0.622″ (Schedule 40). The 1/2″ name is a nominal size that comes from the old iron pipe size (IPS) system.
Do Schedule 40 fittings fit Schedule 80 pipe?
Yes. Both schedules have the same outside diameter, so the pipe fits the same socket fittings. The pressure rating of the whole system is limited by its weakest component.
How long does PVC pipe come?
Schedule 40 and Schedule 80 PVC pipe is usually sold in 10 ft and 20 ft lengths, with plain ends or belled ends. Belled-end pipe has a built-in socket, so you need fewer couplings on long runs.
What does the “schedule” number mean?
The schedule describes the wall thickness for a given pipe size. The higher the number, the thicker the wall: Schedule 80 is thicker than Schedule 40, and Schedule 120 is thicker still.
Get the Right PVC Pipe in Hialeah
FC Plumbing Supply stocks Schedule 40 and Schedule 80 PVC pipe from 1/2″ to 20″, in 10 ft and 20 ft lengths, along with the fittings and PVC cement to finish the job. Browse our Schedule 40 pressure pipe, Schedule 40 bell-end pipe and Schedule 80 pipe, or visit our plumbing supply store in Hialeah. Not sure which size or schedule you need? Bring your measurements and our team will help you match it, with delivery available across Miami-Dade.

